Leadermac Platinum 6-spindle 6”x 9”

This machine is in very good condition. The industrial chrome bed surface is like new.
All machine movements will be reset, The machine will be realigned, any parts broken will be replaced or repaired, paint will be touched up where necessary. It will hold a three month warranty on defective parts.
Categories: ,

Description

TECHNICAL DATA:

  • WORKING WIDTH: 15 – 230 mm 9/16 – 9”
  • WORKING THICKNESS: 10 – 150 mm 3/8 – 6”
  • 1 ST BOTTOM SPINDLE ALLOWABLE CUTTING CIRCLE 125 – 160 MM
  • RIGHT SPINDLE ALLOWABLE CUTTING CIRCLE 112 – 200 MM
  • LEFT SPINDLE ALLOWABLE CUTTING CIRCLE 112 – 200 MM
  • 1 st TOP SPINDLE ALLOWABLE CUTTING CIRCLE 100 – 200 MM
  • 2 nd TOP SPINDLE ALLOWABLE CUTTING CIRCLE` 100 – 200 MM
  • LAST BOTTOM SPINDLE ALLOWABLE CUTTING CIRCLE 100 – 2000 MM
  • UP & DOWN MOTOR 1 HP
  • FEED MOTOR 7.5HP WITH INVERTER
  • SPINDLE DIAMETER 40mm
  • SPINDLE RPM 6000RPM
  • FEED SPEED, INFINITELY VARIABLE 6 – 30 MPM – 20– 95 FPM

SPECIAL FEATURES ON THIS MACHINE

  • 45MM HIGH FENCES AFTER FENCE SIDE HEAD
  • SPINDLE IN/OUT ADJUSTMENT OF BOTTOM SPINDLES AT THE FRONT
  • THREE DRIVEN BOTTOM INFEED ROLLS GOOD FOR LUMBER AND MATERIAL THAT IS HARD TO FEED
  • LATERAL ADJUSTMENT OF BOTH BOTTOM SPINDLES AT THE FRONT. MANY OTHER MODELS ARE AT THE REAR
  • VARIABLE FEED DRIVE
  • TELESCOPIC BED SURFACE PLATES FOR LARGER CUTTING CIRCLES ON BOTH SIDE HEADS. THE ADJUSTMENT IS AT THE FRONT OF THE MACHINE.
  • REMOVEABLE DUST SURROUNDINGS ON SIDE HEADS FOR EASY ACCESS TO LARGE CUTTER HEADS.
  • AUXILARY OVERHEAD FEED ROLLER AT RIGHT SIDE SPINDLE. IDEAL FOR UNEVEN MATERIAL AND SHORT STOCK
  • SIDE GUIDE

STANDARD FEATURES:

1) SOUND & SAFETY ENCLOSURE.THE ENTIRE MACHINE IS COVERED TO REDUCE NOISE & PROVIDE A SAFE WORKING ENVIRONMENT.
2) HARD CHROME FEEDING TABLE & FENCE.
-0.3 mm HARD CHROME ON SURFACE
3) 3 STAGE PRESSURE SETTING OF FEED ROLLER.
– PNEUMATIC ROLLER PRESSURE COMPENSATES FOR LARGE VARIANCES IN WORK PIECE THICKNESS. THE MAX AIR PRESSURE SETTING IS 6 BAR.
4) OIL LUBRICATION FOR FEEDING TABLE.
– TO SUPPLY OIL ON THE 2 POINTS OF FEEDING TABLE WITH TIMER CONTROL.
5) 1.8 METER INFEED TABLE ADJUSTMENT RANGE FOR INFEED TABLE & EDGE-JOINTING FENCE IS 10 mm.
6) ONE PIECE FULL CAST IRON BODY
– HEAVY DUTY ELEMENTS MADE OF HIGH QUALITY CAST IRON WITH OPTIMIZED VIBRATION ABSORPTION CHARACTERISTICS ARE THE BEST FOR THE SMOOTH RUNNING FEEDWORKS &SPINDLE PERFORMANCE.
7) 8 POWER DRIVEN UPPER ROLLER & 3 BOTTOM ROLLERS ARE POWER DRIVEN IN THE FEED TABLE.
– BOTH UPPER & BOTTOM FEED DRIVEN BY CARDAN UNIVERSAL JOINT DRIVE WITH NO CHAINS
PROVIDES MORE ROBUST, LOW MAINTENANCE, LONGER SERVICE LIFE & HIGHER E ACCURACY
8) CONVENTIONAL SPINDLE ADJUSTMENT
– ALL CONTROL LEVERS FOR THE SPINDLES ARE LOCATED AT THE FRONT OF THE MACHINE FOR CONVENIENT ADJUSTMENT.
– EACH SPINDLE IS PROVIDED WITH A MECHANICAL DIGITAL READOUT, GIVING ACCURATE ADJUSTMENTS.
9) SIDE FRONT PRESSURE PLATE ON LEFT VERTICAL SPINDLE
– FULLY ELIMINATES UNSMOOTH PROBLEMS WHEN FEEDING SHORT OR NARROW STOCK.
– THE PRESSURE PLATE IS EASY TO ADJUST.
10) CONVENIENT INFEED ADJUSTMENT
– INFEED TABLE AND FENCE ARE CONVENIENTLY ADJUSTED BY THE SEPARATE CONTROL LEVERS.